Supa-Fix repairs are robust and can be grinded, filed, tapped, sanded and painted! The adhesive and powders are resistant to fluids like oil, petrol and battery acid and heat resistant up to 356°F / 180°C. The application nozzle makes it incredibly accurate to use, ideal for assembling smaller components.
Repairs almost anything
- Carbon Fibre
& Much More!
How to Use SupaFix
• Simply pour the powder over the cracked area. Once the crack is filled, then apply the adhesive and watch as the powder sets in just 7 seconds, leaving in instantly strong repair.
• If the crack goes all the way through then simply tape over the back and fill as stated above. SupaFix comes supplied with an anti curing pin.
The pin is designed to be used to puncture the adhesive bottle, and to also reseal it, preventing the adhesive from curing in the bottle.
Please refrain from cutting the adhesive nozzle with a knife or scissors, as doing so will allow the adhesive to leak into the cap leaving the bottle unusable the next time around. SupaFix also comes supplied with a precision pipe, which can be pushed onto the adhesive bottle nozzle. This allows you to be able to get into the very confined spaces with ease. If the adhesive left in the precision pipe cures over time. Simply cut 1mm off the end of the pipe with scissors to use again.
SupaFix can be used to fill holes and cracks by simply taping over the back of the hole and fill with SupaFix reinforcing powder. Apply the ultra strength adhesive and in seconds the hole is filled to leave a perfect repair. Supa-Fix can then be drilled or screwed into if needed. Where super glue won’t, Supa-fix will.